Amveco Miniature Low Profile Transformers   PRIMARY 2 x 115V or 230V 50/60 Hz To Order Amveco Transformers We Recommend TEMCo Ph: 1-800-613-2290 Or 1-510-490-2187 Link: Power Transformer   The 62000-series Miniature toroidal step-down transformers offers the design engineer the same features as our larger toroidal power transformers, namely, very low EMR ( magnetic strayfields), quiet operation, low temperature rise, low profile, low no-load current and very low no-load losses. Lower Strayfield Higher Efficiency Reduced "Standby" Current Reduced Weight For 230V operation, connect primaries in series by connecting black and red lead wires together and apply 230V across yellow and violet leads wires. For 115V operation, connect primaries in parallel by connecting yellow and red lead wires together and black and violet leads wires. To parallel the secondaries, connect green and brown wires and red and blue together. To put the secondaries in series, the red and brown wires are connected together. Wire Diagram & Schematics STANDARD FEATURES Primary voltage of 115V or 230V at 50 / 60Hz. Safety standard certification (UL 506). UL recognized for insulation Class A (105°C). Meets all requirements of Class E(125°C) UL certifications to +40°C (1.6VA - 25VA) Hipot testing at 4000V between primary and secondary. Maximum ambient temperature of +60°C Epoxy potted center with through hole for M4 bolt CUSTOM DESIGN OPTIONS With a minimum order of 1000 pieces custom specified primary and secondary voltages are available.   MINIMUM ORDERS Minimum order quantity is 500 pieces per part number.     Power VA Part Number Sec-Full Load V Current (mA) No Load Voltage I No-Load Reg. % Dt ° C Eff. % Dim. OdxIDxHT mm 1.6 62000 2x7 114 2x8.94 1.0 (mA) 29 10 77 37.5x7.0x17.0 71grams 62001 2x9 89 2x11.63 62002 2x12 67 2x15.43 62003 2x15 53 2x19.30 62004 2x18 44 2x23.41 62005 2x22 36 2x28.19 3.2 62010 2x7 229 2x10.2 1.5 (mA) 41 20 70 42.0x7.0x17.5 89 grams 62011 2x9 178 2x13.0 62012 2x12 133 2x17.3 62013 2x15 107 2x21.4 62014 2x18 89 2x25.7 62015 2x22 73 2x30.5 5.0 62020 2x7 357 2x9.7   2.0 (mA) 45 29 70 47.0x6.0x18.0 115 grams 62021 2x9 278 2x12.4 62022 2x12 208 2x17.0 62023 2x15 167 2x21.3 62024 2x18 139 2x25.5 62025 2x22 114 2x30.5 7.0 62030 2x7 500 2x9.5 3.0 (mA) 34 25 74 47.0x6.0x21.5 145 grams 62031 2x9 389 2x12.2 62032 2x12 292 2x16.2 62033 2x15 233 2x20.3 62034 2x18 194 2x24.3 62035 2x22 159 2x29.7 10.0 62040 2x7 714 2x8.3 3.0 (mA) 20 24 82 53.5x6.8x23.5 216 grams 62041 2x9 556 2x10.8 62042 2x12 417 2x14.4 62043 2x15 333 2x18.0 62044 2x18 278 2x21.7 62045 2x22 227 2x26.3 15.0 62050 2x7 1071 2x8.9 4.0 (mA) 23 27 81 57.5x7.0x24.0 262 grams 62051 2x9 833 2x11.1 62052 2x12 625 2x14.8 62053 2x15 500 2x18.5 62054 2x18 417 2x22.2 62055 2x22 341 2x27.2 25.0 62060 2x7 1785 2x8.3 5.0 (mA) 19 28 84 58.0x13.8x34.5 388 grams 62061 2x9 1377 2x10.7 62062 2x12 1041 2x14.2 62063 2x15 832 2x17.8 62064 2x18 694 2x21.4 62065 2x22 568 2x26.2 35.0 62070 2x7 2500 2x8.4 7.0 (mA) 17.7 31 85 72.0x17.0x33.5 453 grams 62071 2x9 1944 2x10.6 62072 2x12 1458 2x14.0 62073 2X15 1166 2x17.6 62074 2x18 972 2x20.9 62075 2x22 795 2x25.7 50.0 62080 2x7 3571 2x8.1 8.0 (mA) 15.5 30 86 78.0x22.5x35.0 670 grams 62081 2x9 2777 2x10.4 62082 2x12 2083 2x13.8 62083 2x15 1666 2x17.3 62084 2x18 1388 2x20.7 62085 2x22 1136 2x25.4 (Electrical measurements @ 20°C ambient temperature) All data subject to change without prior notice.

• AMVECO Auto Transformers
• AMVECO Three Phase Transformers
• AMVECO 120V/60 Hz Application Transformers
• AMVECO 2 x 117V 50-60 Hz Application Transformers
• AMVECO Medical Grade Isolation Transformers
• AMVECO Low profile PC Mount Transformers
• AMVECO Miniature Low Profile Transformers
• AMVECO Low Voltage Current Transformers
• AMVECO AC Series 50/60 PC Mount Current Transformers
• AMVECO Linear DC Power Supplies Transformers
• AMVECO Custom Enclosures Transformers
• AMVECO Inductor Transformers
• AMVECO High Frequency product Transformers

 Power Transformer Information:

 Power Transformer Manufacturer

• ACME Transformers - With Acme Electric being in business over 80 years, they have always believed in offering there customers superior service, quality and technical expertise in the transformer market.
• AMVECO Transformers - AMVECO designs and manufactures toroids transformers, current transformers, and auto transformers. Most AMVECO products are custom designed utilizing their state-of-art proprietary CAD programs.  The AMVECO engineers can quickly generate designs in a matter of hours, if needed.
• Federal Pacific Transformers -  Federal Pacific is a division of Electro- Mechanical Corporation, a privately held, American owned company founded in 1958. Federal pacific offers dry-type transformers from .050 KVA through 10,000 KVA single and three phase, up to 34.5 KV, 150 KV BIL with UL approval through 15 KV.
• Marcus Transformer - Ever since they opened their doors for business a half a century ago, they have been a leader in innovative transformer design. As a family-owned company they are proud of the reputation they have earned for making quality-built transformers that deliver exceptional performance and savings.
• Hammond Transformers -  Hammond Manufacturing was founded in 1917 in Guelph, Ontario, Canada. In the last 3 decades it has expanded to the US and the international markets offering many types of power transformers. 
• TEMCo Transformers - TEMCo Transformer, a family-owned business which has been manufacturing and distributing electrical products since 1968. They focus on transformers that significantly reduce power consumption over 30 percent compared to competitive makes.
• GE Transformers - GE has been a key player in the energy industry for more than a century.  Since the installation of their first steam turbine in 1901. They have become number one provider of high-technology power generation and distribution equipment.
• Jefferson Electric Transformers - Jefferson Electric has been a pioneer and innovator of magnetic products since 1915. Jefferson broad line of dry-type transformers are backed by quality assurance systems so stringent that each and every unit gets thoroughly tested before it goes out there door.
• More power transformer brands - Check out more companies by clinking this link.

 Power Transformer Types

• Distribution Transformers - Distribution transformers are generally used in electrical power distribution and transmission power. This class of transformer has the highest power, or volt-ampere ratings. and the highest continuous  voltage rating.
• Substation Transformers - Substation Transformers are large devices which usually weigh tens of thousands of pounds.   They are filled with tens of thousands of gallons of heat transfer fluid.  Although they are typically 99.8% efficient in the transforming of electricity from one voltage to another, processing hundreds of Mega Volts-Amps of electricity force the liberation of hundreds of BTUs per second.
• Medical Grade Isolation
   Transformer - Medical Grade Transformers generally refer to the transformers used in medical devices as well as hospital, biomedical and patient care equipment. There are a number of strict safety rules, guidelines and laws governing the design, construction and the test of these transformers.
• Drive Isolation Transformer - They are used to isolate a drive from a main power line to prevent the transmission of harmonics that the drives produce back into the power line.  They stop drive harmonics from disrupting computers and other sensitive equipment.
• Toroidal Transformers - Toroidal Transformers are more efficient than the cheaper laminated EI types of similar power level. Some of the advantages are smaller size, lower weight, less mechanical hum, (making them superior in audio amplifier), low-off-load loss.

 Power Transformer Types

• Step-Up Transformers - A Step-Up Transformer is one whose secondary voltage is greater than its primary voltage.  This kind of transformer "steps up" the voltage applied to it. -
• Step-Down Transformers - A Step-Down Transformer is  designed to reduce voltage from primary to secondary.  They can range from sizes from .05 KVA to 500 KVA
• Isolation Transformers - An Isolation Transformer is a device that transfers energy from the alternating current (AC) supply to an electrical or electronic load.  It isolates the windings to prevent transmitting certain types of harmonics.
• Buck Boost Transformers - Buck Boost Transformers make small adjustments to the incoming voltage. They are often used to change voltage from 208v to 240v for lighting applications.  Major advantages of Buck boost transformers include; low cost, compact size and light weight. 
• High Voltage Transformer - There are many different types of voltage transformers. A High Voltage Transformer operates with high voltages. Typically, these voltage transformers are used in power transmission applications, where voltages are high enough to present a safety hazard.
• Medium Voltage Transformers - A Medium Voltage Transformer can be connected directly to a primary distribution circuit and generally has the most load diversity. These voltage transformers have installation practices that are generally in accordance with application recommendations from the Institute of Electrical and Electronic Engineers (IEEE).
• Low Voltage Transformers - A Low Voltage Transformer is an electrical device that transforms 120 volts (line voltage) into 12 volts or 24 volts (low voltage). Some uses for low voltage transformer are in landscaping lighting.
• Single Phase Transformers - In electrical engineering, single-phase electric power refers to the distribution of electric power using a system in which all the voltages of the supply vary in unison. Single-phase distribution is used when loads are mostly lighting and heating, with few large electric motors.
• Three Phase Transformers - Three Phase Transformers must have 3 coils or windings connected in the proper sequence in order to match the incoming power and therefore transform the power company voltage to the level of voltage needed while maintaining the proper phasing or polarity.
• Custom Transformers - Custom Transformers are designed for a certain performance specifications and size requirements.  The company works with your engineering specification. 
• Industrial Control Transformers - Industrial Control Transformers are used to convert the available supply voltage to the required voltage to supply industrial control circuits and motor control loads.
• Pad Mounted Transformers - Pad Mounted Transformers are usually single phase, or three phase, and used where safety is a main concern. Typical applications; restaurant, commercial building, shopping mall, institutional. 
• Pole Mounted Transformers - Pole Mounted Transformers are used for distribution in areas with overhead primary lines. Outside a typical house one can see one of these devices mounted on the top of an electrical pole.
• Oil Filled Transformers - Oil Filled Transformers are transformers that use insulating oil as insulating materials.  The oil helps cool the transformer. Because it also provides part of the electrical insulation between internal live parts, transformer oil must remain stable at high temperatures over an extended period.
• Dry Type Transformers - Dry-Type Transformers are available for voltages up through 34.5 kV (although the most common upper limit is 15) and KVA ratings up through 10,000 (with 5000 as the usual limit). Dry-type use air as a coolant, lowering health and environmentally concerns.
• Auto Transformers - An Autotransformer is an electrical transformer with only one winding. The winding has at least three electrical connection points called taps. Autotransformers are frequently used in power applications to interconnect systems operating at different voltage classes, for example 138 kV to 66 kV for transmission. Another application is in industry to adapt machinery built for 480 V supplies to operate on the local 600 V supply.
• More power transformer types - Read further about additional transformer types and their uses.

 Power Transformer Term Definitions

• Electrical Transformers - Electrical Transformers are devices used to raise or lower the voltage of alternating current. For instance, power is transported over long distance in high voltage power lines and then transformers lower the voltage so that the power can be used by a business or household.
• Isolating Transformers - An Isolating Transformer is a transformer, often with symmetrical windings, which is used to decouple two circuits.  An Isolation transformer allows an AC signal or power to be taken from one device and fed into another without electrically connecting the two circuits. Isolation transformers block transmission of DC signals from one circuit to the other, but allow AC signals to pass. 
• Transmission Power Lines - A Transmission Line is the material medium or structure that forms all or part of a path from one place to another for directing the transmission of energy, such as electromagnetic or acoustic waves as well as electric power transmission. Components of transmission lines include wires, coaxial cables,  dielectric slabs, option fibers, electric power lines, and waveguides.
• Transformer Voltage - The measure of the amount of force on a unit charge because of the surrounding charge.
• Transformer Phase - Most transformer are either single phase or three phase.
• Transformer Frequency - The transformer cannot change the frequency of the supply. If the supply is 60 hertz, the output will also be 60 hertz.
• Transformer K Factor - Some transformers are now being offered with a k-factor rating. This measure the transformer's ability to withstand the heating effects of non-sinusoidal harmonic currents produced by much of today's electronic equipment and certain electrical equipment.
• Primary Voltage - The coil winding that is directly connected to the input power.
• Secondary Voltage - The coil winding  supplying the output voltage.
• Harmonic Cancellation - Harmonic cancellation is performed with harmonic canceling transformers also known as phase-shifting transformers. A harmonic canceling transformer is a relatively new power quality product for mitigating harmonic problems in electrical distribution systems. This type of transformer has patented built-in electromagnetic technology designed to remove high neutral current and the most harmful harmonics from the 3rd through 21st.
• Weatherproof - Enclosed transformers come with a weatherproof standard set by NEMA.
• Epoxy Encapsulated - A process in which a transformer or one of its components is completely sealed with epoxy or a similar material. This process is normally preferred when a unit might encounter harsh environmental conditions.
• More power transformer terms - Such as inductor, ground fault, core saturation, current transformer, faraday shield, etc.

Related Transformer Products

• Voltage Regulators - A Voltage Regulator is an electrical regulator designed to automatically maintain a constant voltage level.  It may use an electromechanical mechanism, or passive or active electronic components. Depending on the design, it may be used to regulate one or more AC or DC voltages.
• AC Line Reactor - AC Line Reactors is a three phase transformer used in conjunction with AC variable frequency and DC motor drive. They are a bi-directional protective filtering device.
• Line Power Conditioners - Power or Line Conditioners regulate, filter, and suppress noise in AC power for sensitive computer and other solid state equipment.
• DC Power Supplies - Conversion of one form of electrical power to another desired form and voltage. This typically involves converting 120 or 240 volt AC supplied by a utility company to a well-regulated lower voltage DC for electronic devices.
• Rotary Phase Converters - Rotary Phase Converters are commonly used in home or small commercial or industrial settings. Rotary phase converters convert single-phase power into three-phase power. This is a very cost-effective way to power three-phase electric motors and other three phase equipment.
• Frequency Converters - A Frequency Changer or Frequency Converter is an electronic device that converts alternating current (AC) of one frequency to alternating current of another frequency.
• Voltage Converters - A Voltage Converter changes the voltage of an electrical power source and is usually combined with other components to create a power supply.
• Magnetic Motor Starters - Magnetic Motor Starters are essentially heavy duty relays mounted in boxes, often equipped with heater/thermal overloads matched to the motor they start.
• Motor Starting Auto Transformers - An Auto Transformer starter uses an auto transformer to reduce the voltage applied to a motor during start. The auto transformer may have a number of output taps and be set-up to provide a single stage starter, or a multistage starter.

For an additional resource the Best of Industry Web Directory : Electrical Power Transformer Directory section is quite useful.